This is the meter you would use should you need a 3 Phase meter with amperage of 100Amp. This is a direct connect meter and gives readings of total energy used.
This meter is din rail mounted – should you require an enclosure please order the HT8 here.
If you just want to use this meter for domestic use and not connect to a BMS, please state “No” for programming.
If you are connecting to a BMS system, please ensure you have the following information available if you want us to program the unit (additional cost) :-
Baud Rate : 1200 | 2400 | 4800 | 9600
Address : 1 – 256
Parity : None | Even